Concrete Resurfacing in Roswell, GA

Resurfacing is an outstanding solution for concrete surfaces that meet specific structural conditions:

• Sound Subgrade Support: The underlying soil must be stable, with no severe sunken slabs, washouts, or base voids.
• Cosmetic Surface Wear: The slab exhibits surface scaling, minor pitting, discoloration, or rough broom wear from years of exposure.
• Hairline and Non-Structural Cracks: Minor shrinkage cracks that can be ground out and pre-treated with flexible epoxy or polymer stitch repair.
• Desire for an Aesthetic Upgrade: Homeowners looking to upgrade plain gray concrete to rich colors, stamped textures, or stone patterns without paying for a new pour.

However, if your driveway has deep, shifting fractures, extensive tree root heaving, or severe slab sinking, resurfacing is not recommended because those foundational faults will quickly reflect through the new overlay. In such cases, full concrete driveway replacement is the only permanent, reliable fix.

One of the greatest advantages of concrete resurfacing is the vast array of decorative concrete designs and architectural finishes available:

• Spray-Down Textured Finishes: A textured, slip-resistant surface created by spraying polymer cement through a hopper gun, ideal for pool decks and walkways.
• Stamped Micro-Toppings: Thin decorative overlays stamped with patterns replicating slate, flagstone, Roman cobblestone, or brick.
• Broom-Finished Overlays: Restoring the clean, classic look of freshly poured utility concrete with uniform brushed traction lines.
• Integral and Acid-Stained Tones: Infusing rich earth tones, terra cotta hues, or warm grays that mimic variegated natural stone.

The success of any resurfacing project relies entirely on mechanical surface preparation. Polymer coatings will fail prematurely if applied over dirt, grease, efflorescence, or old sealers. At Millstone Concrete Company, our resurfacing crews use commercial planetary diamond grinders and shot blasters to open the concrete pores and achieve a Concrete Surface Profile (CSP) of 2 to 3.

Next, we perform meticulous concrete repair, grinding out cracks, injecting high-strength structural epoxies, and anchoring reinforcement fabric across repaired joints before applying the overlay primer. Finally, we apply commercial acrylic or polyurethane sealers to lock in color and protect against UV fading, oil penetration, and freeze-thaw cycles.

1. Thorough Slab Inspection: We assess concrete hardness, moisture transmission, and crack stability.
2. Diamond Grinding: We mechanically grind the entire surface to remove contaminates and profile the concrete.
3. Crack Stitching and Leveling: We repair fractures and fill spalled depressions flush with the slab plane.
4. Bond Coat Application: We apply an advanced polymer-modified bonding slurry to ensure permanent adhesion.
5. Overlay Application & Texturing: We apply the resurfacing overlay and tool, trowel, or stamp your chosen decorative pattern.
6. Curing & Protective Sealing: We allow proper cure time in accordance with Portland Cement Association guidelines and apply dual protective seal coats.

Rejuvenate your tired concrete surfaces without the cost of full replacement. Contact Millstone Concrete Company today to schedule your complimentary resurfacing consultation and estimate in Roswell, GA!